Everybody is dreaming of a healthy and perfect lawn at home. Especially for those living in a cool season grasses rule. But, not every lawn needs a complete renovation. Maybe others just needed an extra care with tender loving. For cool season lawns & planting seed, early fall could be the best time to finish such a renovation then spring for a warm season grass and you can do laying new sod, plugs or sprigs, almost anytime during the growing season. Here are the six essential steps to follow:

1. Test the Soil – Investigating the soil is very important before removing your old lawn and that the soil has adequate nutrients and proper pH ideal for the grass to grow. Once you had undergo thorough test on the soil, you will exactly know what to do for a best possible place for your lawn to grow.

2. Remove the old lawn – these requires an average strength to help haul away the remains of the old loan.

3. Preparing the Site - Remove all rocks and expose all the roots. Large visible rocks must be dig up and tree roots be put down below soil level if it is a problem as well. With the sod removed and taken away from the site, rocks removed, holes filled, you’ll want to start adding the necessary amendments. You’ll probably want to add some sand (about 3 cubic yards per 1,000 square feet). To better condition the soil, add aged compost. This will add a lot of bio-mass to the soil (about 3 cubic yards per 1,000 square feet).

4. Tilling it in and Fertilizing - Turn the soil until there are no big clumps or patches of packed earth. with a rotary tiller and add lime, peat moss, or sulfur to balance the soil’s pH level. Spread peat moss with shovel, you can use pelletized lime or sulfur, to spread with a walk-behind spreader set to the appropriate calibration rate listed. And spread a starte fertilizer to the whole area using. Using a metal rake you can work on the fertilizer in one place. Finish grading the soil by raking it level. Pay attention to drainage slopes being careful not to alter the natural drainage pattern.

5. Spread the seed - Select a grass type that would fit in your area. With a simple hand sprinkler, apply the seed as evenly use a walk behind spreader.

6. Water regularly – When seed is sown, Don’t just spray your lawn with a hose nozzle.3 times a day to keep the soil evenly moist, but not soaked. Avoid over watering.Once the seed has sprouted, cut back watering to once a day (depending on local weather). It’s best to water in the morning.

This entry was posted on Thursday, July 3rd, 2008 at 1:13 pm and is filed under Lawn Care Tips, Lawn Care Video Tips, Lawn Care Tools, Gardening Tips, Watering, Seeding, Lawn Care. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.